PMA Neck Turning Tool Model B PNT-200

0.00$
Brand:PMA Tool
Product Code: PNT-200

Overview

Product Description While finishing the design of the Model A we developed the concept of an inexpensive, ergonomic and well-built neck tool. We wanted to be able to offer it with the cutting depth pre-set to a customer’s request, but have it still b...

Available Options

Product Description
While finishing the design of the Model A we developed the concept of an inexpensive, ergonomic and well-built neck tool. We wanted to be able to offer it with the cutting depth pre-set to a customer’s request, but have it still be adjustable by the end user. This is THE neck turning tool for making a first/rough cut for a tight-neck chamber or for a non-tight neck chamber.

Features:

Pre-set to your specific cutting depth (guaranteed within 0.001”)
Same ergonomic shape as our Model A
Same carbide cutters as Model A
Mandrel adjusting screw
PMA 17-4 stainless steel mandrel included (carbide mandrel available)
To see a video of this tool in use go to:

http://atthebench.pmatool.com/index.php/videos/74-hands-on-model-b-neck-turning-tool



Specify below in drop down menu below:

Cutter angle:
30˚ for a wide variety of cartridges. BR, PPC, 6.5x47 and most RSAUM
35˚ for 284 and WSM family cartridges
40˚ for improved cartridges
17.5˚ cutter for 30-06 family
20˚ cutter for 308 family and 338 Lapua
23˚ cutter for 223 family
28˚ cutter for 22-250 (also work for 6mm Rem)
30° for shortneck cartridges such as the 204 Ruger
40° for shortneck cartridges such as the 6mm Dasher
25° for 300 Win Mag and 7mm Rem Mag
Caliber
Neck Wall Thickness
If your desired neck wall thickness is not shown, please make note in the “Order Comments” section when checking out.

Write a review

Note: HTML is not translated!

Rating Bad           Good